The original pocket grill can be made from the material at hand. Lightweight, does not take a lot of meta, it is more like a miniature tube that can fit anywhere. Work on the creation of the original grill to be painstaking, but the results of their work can be used continuously.
For the manufacture of the grill will need:
- 2 trimming pipes of different diameters;
- 2 plugs matched to the size of the larger pipe;
- stainless steel bicycle spokes (you can even broken);
- tool for working with metal.
Grill size is arbitrary. Much here depends on the availability of a suitable material for cooking on coal material. Ideal for such purposes copper and stainless steel.
The knitting needles are trimmed in length.
2 extreme spokes should be slightly longer. This will allow them to bend on one side and, after passing through the through hole, fix on the other.
Ideally, one of the tubes should be free to enter the other. Knitting needles should also fit inside.
Making markings on the tubes, we fill them with holes according to the number of spokes. Extreme holes on one of the tubes do through.
Insert the needles alternately and fix.
The assembled grill is a rigid structure.
And in a disassembled, it resembles a round long pencil case with holes. The assembly or disassembly of the grill will take a few minutes.
If desired, add the grill and legs. To do this, it is necessary to make transverse through holes on the sides.
In the absence of legs to place collapsible lattice can be directly on logs or bricks.
An added bonus is simplified grill care. It is much easier to wash or clean any parts of the grill from grease and soot.